Power the next generation of graphics cards with the CableMod Basics 12V-2×6 90° PCIe Cable. Featuring a 90° 12V-2×6 connector paired with two 12-pin PCIe connectors, this high-quality cable is a replacement cable for be quiet! power supplies, and enables these PSUs to power graphics cards with a 12V-2×6 or 12VHPWR power port.
90° 12V-2×6 Connector with StealthSense Technology
Our patent-pending StealthSense Technology utilizes a new hidden bridge inside the 90° 12V-2×6 connector, removing the need for sense wires altogether. No more unsightly “wire loops” used by competitors – you get a cleaner, more aesthetically pleasing cable, making our StealthSense cables the cleanest and most reliable 12V-2×6 cables available today.
16AWG for 600W Power Delivery
The CableMod Basics 12V-2×6 90° PCIe Cable is constructed with quality 16AWG wire to fully support up to 600W of power delivery, enabling you to power your graphics card without worrying about blue screens or system crashes.
Softer Wire Jackets and Fully Crimped Terminals
Each wire utilizes fully crimped terminals for the most reliable construction, and softer PVC wire jackets means less stress on each terminal when wires are bent. This cable also uses precision molded connectors to ensure compatibility and a secure fit with today’s 12V-2×6 GPUs.
NOTE: Please check our Compatibility List for your PSU model before purchasing. Should you have any questions, feel free to contact our Support Team.
NOTE: This cable requires two unoccupied 12-pin PCI-e ports on your power supply to properly function. Connecting fewer than two connectors to your power supply may cause system damage. Please see our 12VHPWR Cable Guide before installation.
Please read about the differences below and choose the correct variant you need:
90 Degree Variant A is designed for GPU ports with the latch facing upwards. This would result in the cable running towards the cooler side of the GPU. If this is installed in a GPU port with the latch facing downwards, the cable will instead run towards the GPU backplate.
90 Degree Variant B is designed for GPU ports with the latch facing downwards. This would result in the cable running towards the cooler side of the GPU. If this is installed in a GPU port with the latch facing upwards, the cable will instead run towards the GPU backplate.